About This

 

Listed here down the page you'll find more wonderful information and facts regarding What Would Cause My Electric Water Heater to Stop Working?.

Many modern houses utilize an electric hot water heater for their furnace, as a result of its comfort as well as simplicity of use. However, just like any other electrical devices, troubles may occur with its use, all of a sudden. It can be truly aggravating to wake up to a cool shower as opposed to a warm one or having your bath with water that isn't hot adequate and even too warm. Whatever the situation may be, water heater issues can be quite nerve-racking. Thankfully, we've made a list of possible remedies to your hot water heater concerns. There are a number of elements that can create most of these troubles, it could be an issue with the power supply, the electrical burner, or the thermostat. Before doing anything, guarantee you switch off the major power supply for security. Whatever the problem is, getting it repaired must not present too much of an issue if you adhere to these actions:

 

Examine Your Power Supply:

As standard as this may appear, it is very essential. Without sufficient power, your hot water heater will not function. So the first thing to do when your water all of a sudden stops working is to validate that it isn't a power problem. Check if the fuse is blown out or the breaker stumbled. If the breaker is the concern, merely transform it on and off once more. Replace any kind of broken or worn-out fuse. Check the device with power after these modifications to see if it's now working.

 

Inspect the Heating Element in the Water Heater:

If it's not a power trouble, then try having a look at your burner if it is still functioning. Check each of your heating elements to ensure the problem isn't with any one of them. If any one of them is defective, replace that part and afterwards check whether the hot water is back on.

 

Examine Your Thermostat:

If your water heater still isn't functioning or the water coming out isn't warm enough, you might need to check the temperature level settings on your upper thermostat. Make sure the circuit breaker is switched off before doing anything. Open the accessibility panel as well as press the red switch for temperature level reset above the thermostat. This should aid heat up the water. Transform the breaker back on as well as examine if the issue has actually been fixed.

 

Call An Expert:

If after changing all defective parts as well as resetting your temperature level, the water heater still isn't functioning, you may need to contact a specialist plumber for a professional viewpoint. The issue with your heating unit could be that the hot and cold faucets have actually been switched over or it may be undersized for the amount of warm water needed in your house. Whatever the case may be, a professional plumber would help resolve the issue.

 

Final thought

Hot water heater issues are not always significant. Most of them result from small concerns like a blown fuse or damaged burner. Replacing the defective parts should suffice. Nonetheless, if you are still incapable to fix the issue, give a call to your nearby plumber to find to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I was guided to that editorial about How to Troubleshoot and Repair an Electric Water Heater through an associate on a different domain. Be sure to take the time to share this write-up if you enjoyed it. Thanks for going through it.

Hire A Pro